Quality control of solid materials

Base decisions on solid science

Delve into the process of improving quality throughout production

Manufacturing teams use our latest measurement technology to make swift, data-driven decisions before and after coating, printing and bonding. From polymers, composites, glass, and metal to wood and other natural materials see how surface science drives quality control.

What is your material?

What is your process?

Wetting and coating of textiles

Contact angle and surface tension for optimizing the coating of functional textiles

TVA100B

Wetting measurements in depressions and on concave surfaces

Why test inks don’t tell the full truth

One of the most commonly used methods to approach surface free energy is test …

Polar part

The polar part is that part of the surface free energy of a solid or the surface tension of a liquid …

Owens, Wendt, Rabel and Kaelble (OWRK) method

The Owens, Wendt, Rabel and Kaelble method is a standard method for calculating the surface free energy …

DSA30E

Versatile automated wetting and adhesion analysis of solids and liquids

DSA100L

Automatic wettability analysis of large surfaces

Adhesion on glass

Contact angle and surface tension in glass cleaning and coating

Roll-off angle

The roll-off angle is the angle of inclination of a surface at which a drop rolls off it.

Drop shape

Revolutionary dosing technique | Liquid Needle

Watch the story of the Liquid Needle, our revolutionary dosing technique for contact angle measurement. This fast and reproducible way of drop placement uses a very thin jet which does not d

Fiber reinforced polymers

Contact angle and surface tension for optimizing the wetting and adhesion between fibers and matrix …

Coating of glass

Quality control of the interface chemistry of glass bonds and treated surfaces

Contact angle

When an interface exists between a liquid and a solid, the angle between the surface of the liquid and …

DSA30B

The versatile manual instrument for changing contact angle tasks

DSA100S

The semi-automatic premium solution for wettability analysis

Offset printing

Quality assurance by means of interfacial chemical investigations of moistening agents, inks and printing …

Lotus effect

The lotus effect (lotus blossom effect) describes the behavior of ultrahydrophobic surfaces.

Metal plating

Interfacial measurement techniques for characterizing wetting agents and checking for their concentration

Determine how clean surfaces are: Quickly and on the go

Optimizing residence times in cleaning baths

DSA25B

The easy-to-use manual instrument for changing contact angle tasks

MSA One-Click SFE

Analyzing wettability in a second with only one click

Wetting

Wetting describes the degree to which a liquid spreads on a solid when it comes into contact with it. …

ADVANCE Software

Ready for Industry 4.0! | ADVANCE API

Quality control requires the simplest possible useability. Our ADVANCE WebApp reduces operation to a click of a button in the browser of any computer. The ADVANCE API goes even further and c

Coating of polymers

Methods for measuring wetting and adhesion

Surface free energy (SFE), surface energy

Surface free energy (SFE) is the work that would be necessary to increase the surface area of a solid …

Top-view distance method

The top-view distance method is an optical method for measuring the contact angle.

Drop shape analysis

Drop shape analysis (DSA) is an image analysis method for determining the contact angle from the shadow …

Characterizing particle size of filler materials quickly and easily

Sedimentation measurements on calcium carbonate powders with a tensiometer

Interfacial tension

In the broader sense, interfacial tension is defined as the work which must be expended to increase …

DSA25E

From one-click wettability measurement to analysis of solid-liquid adhesion

Surface treatment of wood

Surface tension and contact angle for optimizing the protection and bonding of wood

Circle method

Method for determining the contact angle in drop shape analysis. With the circle method (circular segment …

Soldering processes

Contact angle and surface tension as parameters for optimizing soldering processes

MSA Flexible Liquid

Fast, automatic, and non-destructive wetting analysis with your liquids of choice

Spreading

Spreading describes the expansion of a liquid phase on a second liquid or solid phase (complete wetting). …

Production of ceramic surfaces

Methods for optimizing the surface of ceramic materials and coatings

Drop shape

Mobile surface quality control | MSA

Measure surface free energy with one click an on-site with the Mobile Surface Analyzer – MSA. Our animated video shows all the features of this instrument and how it is tailor-made for mobil

Tensiometers

Tensíío Instrument Demo | Introduction (Playlist)

This introduction is part of a growing video series about Tensíío. Watch application expert Dr. Andrew Mellor explain how the setup can be adapted to your specific task. Experience the method variety of the instrument as well as its features designed to make the daily lab routine as convenient as possible.

Surface roughness

Surface roughness is the degree of unevenness of the surface of a solid below the scale of magnitude …

Coating of metals

Chemical interface measurements for protection, painting and bonding

Confocal microscopy

Confocal microscopy is an optical method for obtaining three-dimensional images of surface textures …

Production of cement and concrete

Interfacial chemistry measuring methods for the material behavior before and after setting

Drop shape

Surface free energy with one click | MSA

Wetting and adhesion of materials is governed by their surface free energy (SFE). To optimize painting, coating, or bonding, the SFE is increased by pretreatment. For quality control, our Mo

Production of electronic boards

Optimization of cleaning and final coating using surface chemical methods

Drop shape

Universal analysis of wettability and adhesion | DSA100

How intensively a solid is wetted by a liquid strongly depends on the solid’s surface free energy (SFE). The modularity and versatility of the Drop Shape Analyzer – DSA100, our high-end inst

DSA100W

Automatic wettability and adhesion analysis of wafers and other round samples

Liquid Needle

The Liquid Needle is a dosing technology for optical contact angle measurement developed by KRÜSS.

Wettability of contact lenses

Contact angle measurements for ensuring quality and the development of biocompatible materials

Ayríís

Surface quality control has never been so easy and reliable

Replacing the solid needle by a liquid one when measuring static contact angles

Comparison of the traditional solid needle dosing system and a novel pressure-based dosing system, a …

Surface Science Online Course

Increase your knowledge and update your practical expertise in the field of surface science. Facilitated …

Tensiometers

Universal analysis of liquid and solid surfaces | K100

Determining surface and interfacial tension, contact angles, or critical micelle concentration is necessary in many industries. Whether improving surfactants, cosmetics, inks, or pharmaceuti

Drop shape

Next level wettability control | Ayríís

Quality control has a definitive outcome: pass or fail. Ayríís gives the verdict for the wettability of your surfaces with the 3D Contact Angle – fast, mobile, and without user intervention.

Production of latex

Investigations into the wetting of immersion molds and into dispersion and emulsion stability

Control of polishing processes by measuring surface roughness according to ISO 25178 / ISO 4288

Correlation between grain size and standard roughness parameters using the Surface Roughness Analyzer …

Adhesion on metals

Contact angle and surface tension for the processing of metal surfaces

DSA25S

Semi-automatic wettability analysis with high dosing precision

DSA100E

The automated premium solution for wetting and adhesion analysis of solids and liquids

Coating of fibers

Methods for monitoring wetting, adhesion and cleaning

Height-width method

Method for determining the contact angle in drop shape analysis. The contact angle is calculated from …

Tensiometer

A tensiometer is a device for measuring the surface tension of a liquid and/or the interfacial tension …

Polymer surface treatment

Contact angle measurements for determining wettability and adhesion

Inkjet printing

Optimization of the ink, the printing process and the substrate with surface science methods

DSA30S

The versatile instrument for semi-automatic wettability analysis

Adhesion on polymers

Contact angle and surface tension for optimizing plastic coatings

DSA100B

The manual premium solution for changing contact angle tasks

Why test inks cannot tell the full truth about surface free energy

A comparative study between test inks and contact angle measurements in our laboratory

Sessile Drop

The sessile drop is the standard arrangement for optical measurement of the contact angle using drop …

Quality control of wafers

Contact angle and surface energy as parameters for the structure of homogenous, functional wafer layers

Wettability

Wettability describes the attempt of a solid to form a common interface with a liquid which comes into …

ADVANCE Software

ADVANCE | Drop Shape

Comprehensive wetting and adhesion analysis requires intelligent and versatile software – like ADVANCE. The software supports every degree of automization up to full software control of surf